Vacancy No. IMT 20-18
IMT 20-18 Master Thesis: Development of nanofiltration well plate device
Membrane materials development requires extensive material characterization methods. These are often time consuming and hence restrict the number of materials that can be tested. 96 well plates have been designed for rapid throughput ultrafiltration (UF) in various laboratory applications. This is achieved through the application of a vacuum device. The challenge of this project is to construct a device that can operate with an applied pressure such that the function of nanofiltration (NF) membranes can be characterized. Further, the membranes are to be exchangeable such that both commercial as well as self-made membranes can be characterized.
The aim of this project is to design a suitable device and arrange for the manufacture of a prototype. Initial experiments will focus on leak tests, followed by permeability studies of commercial membranes. If successful, the device can be applied to a specific water treatment challenge such as desalination or filtration of micropollutants.
The following task will be performed:
- Literature review on the topic (96 well plate method principles and application for filtration; membrane characterization methodologies used for retention measurements)
- Design a device and discuss preliminary drawings with a suitable workshop
- Set-Up auxiliary equipment (pumps and data acquisition)
- Test the prototype device and report results of leak and permeability tests
Analyse experimental data and write/co-author a research publication (in English)
Please email CV, transcripts and motivation letter with available time period for evaluation.
Further information on the Institute of Microstructure Technology (IMT): www.imt.kit.edu
Basic knowledge in engineering design, technical drawing, fluid dynamics, mechanical process engineering, water treatment technologies, interest in membrane technology. Evidenced writing skills in English language, communication with mechanical workshops, proficiency with AutoCAD (or similar) drawing and Origin Labs data analysis and graphing software, willingness to lead or contribute to the writing of a scientific publication or maybe a patent application.
Field of study: Studies in Mechanical/Chemical/Process Engineering or equivalent (Uni, TH)
Institute of Microstructure Technology (IMT)
as soon as possible
Prof. Dr. Alexander Nesterov-Müller, IMT,
+49 721 608-22727 (e-mail: email@example.com), www.imt.kit.edu/807_284.php
Prof. Dr.-Ing. Andrea Schäfer, IFG,
(e-mail: firstname.lastname@example.org), mt.ifg.kit.edu
Please apply online using the button below for this vacancy number IMT 20-18.
Personnel support is provided by
phone: +49 721 608-25184,
Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
If qualified, handicapped applicants (m/f/d) will be preferred.